Sportsmatch – 9-11mm dovetail mounts for 1" tube

Adjustable in windage and elevation. The lateral position can also be adjusted to achieve a perfect dovetail fit. The locking screws have a vibration-damping coating that sits against a hardened steel pin, ensuring the zero doesn't shift. Fits most rifles with a lens diameter of up to 60 mm. Vertical adjustment of up to 75 MOA.

Dampens even the heaviest recoil. The scope mounts have been tested with a spring-loaded rifle producing 25 lb/ft of recoil.

With this mount, the scope can be zeroed in practice by adjusting only the mount and using the scope's own turrets for fine-tuning at the end of the process.

This means the optic can be "centered," with the turrets set to the mid-point of adjustment before the mounts are used to zero the point of impact.

An additional benefit of this mount relates to the classic air rifle zeroing situation, where the scope's turret adjustment has run out (usually too low), yet the point of impact is still several centimeters off zero. Barrel droop can be a common cause of this problem, as can scopes whose internal adjustment range is simply too limited. This requires an almost perfect alignment in the rifle's action in order to set the zero.

Two-piece, two-screw mounts for extended-length scopes.
Fits 9-11 mm rails.
Does not include a recoil stop.
1-inch high scope rings.
Fits lens diameters up to 60 mm. A = 26.5-29 mm (height from the base's contact point on the rail to the bottom of the scope ring).
Weight: 116 g